Even complicated and confusing topics will be easily developed and covered if you request our help writing an essay. Place an order today!

You are to prepare a submission to satisfy your client’s requirements as outlined below. You are required to investigate the issues at Pressure Hydraulics and provide a feasibility study into the improvement to their current business processes. You willneed to conduct an investigation into the client’s problems and evaluate a solution tomeet their business needs.Overview–Pressure HydraulicsPressure Hydraulics is a locally owned business that currently has three service centres; Newcastle, Toronto and Maitland. Each service centre provides maintenance and specialised servicing of hydraulic systems as used in cars, trucks and earth moving equipment. The Maitland service centre also provides a specialty service to the mining industry where two purpose built trucks go onsite to service a range of mining equipment.The business has become quite profitable in the past years and its owner, Allan Taylor, has devised plans to expand by opening service centres at Coffs Harbour and Gosford. Allan has future plans for other service centres along the east coast of NSW. He also feels that the time is right to look at how IT can support the existing business and enable his future business plans.Currently, Allan spends a portion of each day at each service centre to monitor its operations. This is leaving little time to continue developing his business and he realises he will not be able to spend the same sort of time in the Coffs Harbour and Gosford service centres.Existing SystemEach service centre operates as an independent business, with eight technicians in the workshop (one of whom is a workshop foreman) and one office assistant. The office assistant takes phone calls from people requesting quotes for work or to have work done. For requests on quotes, the office assistant looks up a hard copy of a price book (known as The Price Book) and gives a verbal quote. Allan is unhappy with the time being taken to update the Price Book as the office assistant is often too busy to update the prices from the supplier invoices. Sometimes, this time delay results in either lost sales if the price has gone down or lost income if the price has gone up.If a customer phones to make a booking for work to be done, the office staff assistant writes down the details in a journal (Works Book). Any variations to the Works Book by a customer requesting to change a date/time results in crossed out entries. There have been times when this has been the cause of misinterpretation as to when a job is booked in. Other problems with the system include occasional overbooking or slack periods for the workshop stWhen a customerWhen a customer arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.After an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryAfter an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryWrite 400 words for executive summary.And can you write 50 words for what you reccommed for the company.And make it on power point presentation style.

You are to prepare a submission to satisfy your client’s requirements as outlined below. You are required to investigate the issues at Pressure Hydraulics and provide a feasibility study into the improvement to their current business processes. You willneed to conduct an investigation into the client’s problems and evaluate a solution tomeet their business needs.Overview–Pressure HydraulicsPressure Hydraulics is a locally owned business that currently has three service centres; Newcastle, Toronto and Maitland. Each service centre provides maintenance and specialised servicing of hydraulic systems as used in cars, trucks and earth moving equipment. The Maitland service centre also provides a specialty service to the mining industry where two purpose built trucks go onsite to service a range of mining equipment.The business has become quite profitable in the past years and its owner, Allan Taylor, has devised plans to expand by opening service centres at Coffs Harbour and Gosford. Allan has future plans for other service centres along the east coast of NSW. He also feels that the time is right to look at how IT can support the existing business and enable his future business plans.Currently, Allan spends a portion of each day at each service centre to monitor its operations. This is leaving little time to continue developing his business and he realises he will not be able to spend the same sort of time in the Coffs Harbour and Gosford service centres.Existing SystemEach service centre operates as an independent business, with eight technicians in the workshop (one of whom is a workshop foreman) and one office assistant. The office assistant takes phone calls from people requesting quotes for work or to have work done. For requests on quotes, the office assistant looks up a hard copy of a price book (known as The Price Book) and gives a verbal quote. Allan is unhappy with the time being taken to update the Price Book as the office assistant is often too busy to update the prices from the supplier invoices. Sometimes, this time delay results in either lost sales if the price has gone down or lost income if the price has gone up.If a customer phones to make a booking for work to be done, the office staff assistant writes down the details in a journal (Works Book). Any variations to the Works Book by a customer requesting to change a date/time results in crossed out entries. There have been times when this has been the cause of misinterpretation as to when a job is booked in. Other problems with the system include occasional overbooking or slack periods for the workshop stWhen a customerWhen a customer arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.After an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryAfter an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryWrite 400 words for executive summary.And can you write 50 words for what you reccommed for the company.And make it on power point presentation style.

You are to prepare a submission to satisfy your client’s requirements as outlined below. You are required to investigate the issues at Pressure Hydraulics and provide a feasibility study into the improvement to their current business processes. You willneed to conduct an investigation into the client’s problems and evaluate a solution tomeet their business needs.Overview–Pressure HydraulicsPressure Hydraulics is a locally owned business that currently has three service centres; Newcastle, Toronto and Maitland. Each service centre provides maintenance and specialised servicing of hydraulic systems as used in cars, trucks and earth moving equipment. The Maitland service centre also provides a specialty service to the mining industry where two purpose built trucks go onsite to service a range of mining equipment.The business has become quite profitable in the past years and its owner, Allan Taylor, has devised plans to expand by opening service centres at Coffs Harbour and Gosford. Allan has future plans for other service centres along the east coast of NSW. He also feels that the time is right to look at how IT can support the existing business and enable his future business plans.Currently, Allan spends a portion of each day at each service centre to monitor its operations. This is leaving little time to continue developing his business and he realises he will not be able to spend the same sort of time in the Coffs Harbour and Gosford service centres.Existing SystemEach service centre operates as an independent business, with eight technicians in the workshop (one of whom is a workshop foreman) and one office assistant. The office assistant takes phone calls from people requesting quotes for work or to have work done. For requests on quotes, the office assistant looks up a hard copy of a price book (known as The Price Book) and gives a verbal quote. Allan is unhappy with the time being taken to update the Price Book as the office assistant is often too busy to update the prices from the supplier invoices. Sometimes, this time delay results in either lost sales if the price has gone down or lost income if the price has gone up.If a customer phones to make a booking for work to be done, the office staff assistant writes down the details in a journal (Works Book). Any variations to the Works Book by a customer requesting to change a date/time results in crossed out entries. There have been times when this has been the cause of misinterpretation as to when a job is booked in. Other problems with the system include occasional overbooking or slack periods for the workshop stWhen a customerWhen a customer arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.After an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryAfter an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryWrite 400 words for executive summary.And can you write 50 words for what you reccommed for the company.And make it on power point presentation style.

You are to prepare a submission to satisfy your client’s requirements as outlined below. You are required to investigate the issues at Pressure Hydraulics and provide a feasibility study into the improvement to their current business processes. You willneed to conduct an investigation into the client’s problems and evaluate a solution tomeet their business needs.Overview–Pressure HydraulicsPressure Hydraulics is a locally owned business that currently has three service centres; Newcastle, Toronto and Maitland. Each service centre provides maintenance and specialised servicing of hydraulic systems as used in cars, trucks and earth moving equipment. The Maitland service centre also provides a specialty service to the mining industry where two purpose built trucks go onsite to service a range of mining equipment.The business has become quite profitable in the past years and its owner, Allan Taylor, has devised plans to expand by opening service centres at Coffs Harbour and Gosford. Allan has future plans for other service centres along the east coast of NSW. He also feels that the time is right to look at how IT can support the existing business and enable his future business plans.Currently, Allan spends a portion of each day at each service centre to monitor its operations. This is leaving little time to continue developing his business and he realises he will not be able to spend the same sort of time in the Coffs Harbour and Gosford service centres.Existing SystemEach service centre operates as an independent business, with eight technicians in the workshop (one of whom is a workshop foreman) and one office assistant. The office assistant takes phone calls from people requesting quotes for work or to have work done. For requests on quotes, the office assistant looks up a hard copy of a price book (known as The Price Book) and gives a verbal quote. Allan is unhappy with the time being taken to update the Price Book as the office assistant is often too busy to update the prices from the supplier invoices. Sometimes, this time delay results in either lost sales if the price has gone down or lost income if the price has gone up.If a customer phones to make a booking for work to be done, the office staff assistant writes down the details in a journal (Works Book). Any variations to the Works Book by a customer requesting to change a date/time results in crossed out entries. There have been times when this has been the cause of misinterpretation as to when a job is booked in. Other problems with the system include occasional overbooking or slack periods for the workshop stWhen a customerWhen a customer arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.arrives at a service centre for work to be done, the office staff member writes out a Job Card with the customer details along with the price from The Price Book for the job. There is sometimes a discrepancy between what the Price Book shows and what the customer says they were quoted for that particular work. When completed, the Job Card is passed to the workshop foreman who assigns the job to a technician. When the job is completed, the technician initials the Job Card and gives it back to the workshop foreman, who returns it to the office. The office assistant writes out an invoice and collects payment from the customer; cash, EFTPOS and credit card are acceptable forms of payment. Once per week, the office assistant uses the Job Cards to prepare an order for stock replacement.Allan has developed a business relationship with several transport companies wheretwo technicians will go to the transport companies’ central site and service thehydraulics on a truck. As the parts required to perform the service can be varied, a special van equipped with basic workshop equipment and a full range of component parts is used. The time taken for these jobs can be varied and unpredictable. Upon returning from such a job, the technicians will alert the workshop foreman that the job has been completed. The office assistant is then informed and an invoice written out and mailed to the transport company. Carbon copies are used to track such invoices. The Maitland service centre provides a service to the mining industry and there have been a few repeated issues with the incorrect component parts being taken onsite for servicing the machinery. Such mistakes not only costs a loss in terms of travel time back to the service centre to collect the correct part, but the mining companies have very tight maintenance schedules. Machinery has to be available and delays are not tolerated.Each fortnight, Allan contacts the workshop foremen and checks the hours worked by staff at the service centre. He then prepares the payroll and writes cheques for each employee.Each day, the office assistant banks theday’s takings and gives the bank receipt toAllan when he makes his daily call. Usually this will be the following day from the bank deposit. Allan then does a reconciliation of money banked with the previousday’s takings.Apart from the issues identified above, Allan wants to achieve the following:- Ensuring repeat business from mining companies.- Improve control over stock ordering. A new system is required to manage this aspect of the business. The ability to order stock for the three businesses instead of individual ordering would ensure economies not being realised at the moment.- Ability to quickly determine if a required component part is in stock.- Ability to generate an invoice off data held within the system.- Improved payroll process to reduce the need to contact staff for details. Allan would prefer a system that recorded the working hours daily and also supported staff being paid directly through his bank system.- Tracking customers for repeat business. Allan wants a system that will track customers and contact them at specified times with special offers.- Price Book issues. A system to have timely production of price variations to arrive at all service centres on the same day.- Technology to support these changes.After an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryAfter an initial investigation, Allan has asked your group to develop a feasibility report on providing a suitable solution for the accounting and payroll problems. At aminimumlevel, your feasibility report should contain the following generic sections:Your Task:You are required to submit a feasibility report.At a minimum level, your feasibility report should contain the following generic sections:?Executive SummaryWrite 400 words for executive summary.And can you write 50 words for what you reccommed for the company.And make it on power point presentation style.

testimonials icon
Order Grade A+ Academic Papers Instantly!...
testimonials icon
US 101 Week 9 DQsUS 101 Week 9 DQs...
testimonials icon
Industry experts believe blockchain is a technology that has the potential to affect the business of most IT professionals in the next five years....
testimonials icon
Read attached file and answer the questions.No plagiarism. Don' copy / paste information from internet.Due date...
testimonials icon
Topic 3 DQ 1Do you believe that eating disorders should be categorized as mental illness? Use diagnostic criteria from...
testimonials icon
MBA 6601, International BusinessUnit IV AssignmentComplete Part1 and Part 2 of this assignment, and submit as a single document for grading.Part 1:Yo...
testimonials icon
Just like any other citizen or professional, a nurse is under the authority of the employer as well as of...
testimonials icon
The purpose of this case study is to research and complete a thorough analysis of the Exclusionary Rule. Your paper will summarize the Exclusionary...
testimonials icon
Review the case histories available from the Society of Professional Journalists available at...
testimonials icon
Collaborative Learning Community: Grand Nursing Theorist Assignment: Theorist Identification and RationaleDetails: This is a CLC assign...
testimonials icon
You are required to interact with at least three scholarly sources, and at least two of your sources must be from this course's assigned readin...

Other samples, services and questions:

Calculate Price

When you use PaperHelp, you save one valuable — TIME

You can spend it for more important things than paper writing.

Approx. price
$65
Order a paper. Study better. Sleep tight. Calculate Price!
Created with Sketch.
Calculate Price
Approx. price
$65