Strayer BUS430 week 5 Quiz
Latest 2016 Jan.

• Question
1

The
determination of specific job tasks and responsibilities is called ____.

• Question
2

A ____
layout consists of a functional grouping of equipment or activities that do
similar work.

• Question
3

Which
of the following is not a common approach for designing process layouts?

• Question
4

Which
type of layout is best for high volumes of demand with few if any setups/changeovers?

• Question
5

A(n)
____ performs entire jobs rather than specialized, assembly line work.

• Question
6

For a
given cycle time in line balancing, assembly-line efficiency can be increased
by

• Question
7

Assembly
line balancing

• Question
8

Which
one of the following fits best with process layout?

• Question
9

All of
the following are common objectives of layout studies except

• Question
10

____ is
vertical expansion of job duties to give the worker more responsibility.

• Question
11

The
production of large goods such as airplanes is best accomplished using a ____
layout.

• Question
12

An
assembly line with 28 activities is to be balanced. The total amount of time
required for all 28 activities is 39 minutes. The line will operate for 450
minutes per day. What must the cycle time be to achieve an output rate of 400
units/day?

• Question
13

____
set their own goals and inspect their own work, often hire their own
replacements and prepare their own budgets.

• Question
14

The
typical layout of facilities in a hospital would be an example of a ____
layout.

• Question
15

A ____
layout is an arrangement based on the sequence of operations that are performed
during the manufacturing of a good or the delivery of a service.

• Question
16

Factors
such as managers’ preferences, services and taxes, available transportation
systems, banking services and environmental impacts would be most closely
related to which level of the facility location hierarchy?

• Question
17

The
weights typically used in the center-of-gravity method are

• Question
18

The
Supply Chain Operations Reference (SCOR) Model function that entails procuring
goods and services to meet planned or actual demand is called ____.

• Question
19

The
Supply Chain Operations Reference (SCOR) Model function that entails all order
management activities from processing customer orders to routing shipments,
managing goods at distribution centers and invoicing the customer is called
____.

• Question
20

Which
of the following is not a basic function of the Supply Chain Operations
Reference (SCOR) model?

• Question
21

The
metric “perfect order fulfillment” is often used to measure ____.

• Question
22

Which
one of the following is not directly related to a supply chain?

• Question
23

A(n)
____ seeks to balance capacity and demand, might use only a few large
distribution centers, and minimize costs of routing products from factories to
retail stores and customers.

• Question
24

A firm
that specializes in certain types of goods-producing activities, such as
customized design, manufacturing, assembly, and packaging, and works for end
users is called a ____.

• Question
25

A
contract manufacturer can offer significant competitive advantages. Which one
of the following is not an advantage of using a contract manufacturer.

• Question
26

A push
system

• Question
27

The
point in the supply chain that separates the push system from the pull system
is called the

• Question
28

The
center-of-gravity method takes all the following into account except

• Question
29

Managing
the flow of goods and materials from the customer backward through the supply
chain is called

• Question
30

____ is
the process of delaying product customization until the product is closer to
the customer at the end of a supply chain.

Strayer BUS430 week 5 Quiz
Latest 2016 Jan.

• Question
1

The
determination of specific job tasks and responsibilities is called ____.

• Question
2

A ____
layout consists of a functional grouping of equipment or activities that do
similar work.

• Question
3

Which
of the following is not a common approach for designing process layouts?

• Question
4

Which
type of layout is best for high volumes of demand with few if any setups/changeovers?

• Question
5

A(n)
____ performs entire jobs rather than specialized, assembly line work.

• Question
6

For a
given cycle time in line balancing, assembly-line efficiency can be increased
by

• Question
7

Assembly
line balancing

• Question
8

Which
one of the following fits best with process layout?

• Question
9

All of
the following are common objectives of layout studies except

• Question
10

____ is
vertical expansion of job duties to give the worker more responsibility.

• Question
11

The
production of large goods such as airplanes is best accomplished using a ____
layout.

• Question
12

An
assembly line with 28 activities is to be balanced. The total amount of time
required for all 28 activities is 39 minutes. The line will operate for 450
minutes per day. What must the cycle time be to achieve an output rate of 400
units/day?

• Question
13

____
set their own goals and inspect their own work, often hire their own
replacements and prepare their own budgets.

• Question
14

The
typical layout of facilities in a hospital would be an example of a ____
layout.

• Question
15

A ____
layout is an arrangement based on the sequence of operations that are performed
during the manufacturing of a good or the delivery of a service.

• Question
16

Factors
such as managers’ preferences, services and taxes, available transportation
systems, banking services and environmental impacts would be most closely
related to which level of the facility location hierarchy?

• Question
17

The
weights typically used in the center-of-gravity method are

• Question
18

The
Supply Chain Operations Reference (SCOR) Model function that entails procuring
goods and services to meet planned or actual demand is called ____.

• Question
19

The
Supply Chain Operations Reference (SCOR) Model function that entails all order
management activities from processing customer orders to routing shipments,
managing goods at distribution centers and invoicing the customer is called
____.

• Question
20

Which
of the following is not a basic function of the Supply Chain Operations
Reference (SCOR) model?

• Question
21

The
metric “perfect order fulfillment” is often used to measure ____.

• Question
22

Which
one of the following is not directly related to a supply chain?

• Question
23

A(n)
____ seeks to balance capacity and demand, might use only a few large
distribution centers, and minimize costs of routing products from factories to
retail stores and customers.

• Question
24

A firm
that specializes in certain types of goods-producing activities, such as
customized design, manufacturing, assembly, and packaging, and works for end
users is called a ____.

• Question
25

A
contract manufacturer can offer significant competitive advantages. Which one
of the following is not an advantage of using a contract manufacturer.

• Question
26

A push
system

• Question
27

The
point in the supply chain that separates the push system from the pull system
is called the

• Question
28

The
center-of-gravity method takes all the following into account except

• Question
29

Managing
the flow of goods and materials from the customer backward through the supply
chain is called

• Question
30

____ is
the process of delaying product customization until the product is closer to
the customer at the end of a supply chain.

Strayer BUS430 week 5 Quiz
Latest 2016 Jan.

• Question
1

The
determination of specific job tasks and responsibilities is called ____.

• Question
2

A ____
layout consists of a functional grouping of equipment or activities that do
similar work.

• Question
3

Which
of the following is not a common approach for designing process layouts?

• Question
4

Which
type of layout is best for high volumes of demand with few if any setups/changeovers?

• Question
5

A(n)
____ performs entire jobs rather than specialized, assembly line work.

• Question
6

For a
given cycle time in line balancing, assembly-line efficiency can be increased
by

• Question
7

Assembly
line balancing

• Question
8

Which
one of the following fits best with process layout?

• Question
9

All of
the following are common objectives of layout studies except

• Question
10

____ is
vertical expansion of job duties to give the worker more responsibility.

• Question
11

The
production of large goods such as airplanes is best accomplished using a ____
layout.

• Question
12

An
assembly line with 28 activities is to be balanced. The total amount of time
required for all 28 activities is 39 minutes. The line will operate for 450
minutes per day. What must the cycle time be to achieve an output rate of 400
units/day?

• Question
13

____
set their own goals and inspect their own work, often hire their own
replacements and prepare their own budgets.

• Question
14

The
typical layout of facilities in a hospital would be an example of a ____
layout.

• Question
15

A ____
layout is an arrangement based on the sequence of operations that are performed
during the manufacturing of a good or the delivery of a service.

• Question
16

Factors
such as managers’ preferences, services and taxes, available transportation
systems, banking services and environmental impacts would be most closely
related to which level of the facility location hierarchy?

• Question
17

The
weights typically used in the center-of-gravity method are

• Question
18

The
Supply Chain Operations Reference (SCOR) Model function that entails procuring
goods and services to meet planned or actual demand is called ____.

• Question
19

The
Supply Chain Operations Reference (SCOR) Model function that entails all order
management activities from processing customer orders to routing shipments,
managing goods at distribution centers and invoicing the customer is called
____.

• Question
20

Which
of the following is not a basic function of the Supply Chain Operations
Reference (SCOR) model?

• Question
21

The
metric “perfect order fulfillment” is often used to measure ____.

• Question
22

Which
one of the following is not directly related to a supply chain?

• Question
23

A(n)
____ seeks to balance capacity and demand, might use only a few large
distribution centers, and minimize costs of routing products from factories to
retail stores and customers.

• Question
24

A firm
that specializes in certain types of goods-producing activities, such as
customized design, manufacturing, assembly, and packaging, and works for end
users is called a ____.

• Question
25

A
contract manufacturer can offer significant competitive advantages. Which one
of the following is not an advantage of using a contract manufacturer.

• Question
26

A push
system

• Question
27

The
point in the supply chain that separates the push system from the pull system
is called the

• Question
28

The
center-of-gravity method takes all the following into account except

• Question
29

Managing
the flow of goods and materials from the customer backward through the supply
chain is called

• Question
30

____ is
the process of delaying product customization until the product is closer to
the customer at the end of a supply chain.

Strayer BUS430 week 5 Quiz
Latest 2016 Jan.


• Question
1


The
determination of specific job tasks and responsibilities is called ____.


• Question
2


A ____
layout consists of a functional grouping of equipment or activities that do
similar work.



• Question
3


Which
of the following is not a common approach for designing process layouts?


• Question
4


Which
type of layout is best for high volumes of demand with few if any setups/changeovers?


• Question
5


A(n)
____ performs entire jobs rather than specialized, assembly line work.


• Question
6


For a
given cycle time in line balancing, assembly-line efficiency can be increased
by



• Question
7


Assembly
line balancing


• Question
8


Which
one of the following fits best with process layout?


• Question
9


All of
the following are common objectives of layout studies except


• Question
10


____ is
vertical expansion of job duties to give the worker more responsibility.


• Question
11


The
production of large goods such as airplanes is best accomplished using a ____
layout.



• Question
12


An
assembly line with 28 activities is to be balanced. The total amount of time
required for all 28 activities is 39 minutes. The line will operate for 450
minutes per day. What must the cycle time be to achieve an output rate of 400
units/day?





• Question
13


____
set their own goals and inspect their own work, often hire their own
replacements and prepare their own budgets.



• Question
14


The
typical layout of facilities in a hospital would be an example of a ____
layout.



• Question
15


A ____
layout is an arrangement based on the sequence of operations that are performed
during the manufacturing of a good or the delivery of a service.



• Question
16


Factors
such as managers’ preferences, services and taxes, available transportation
systems, banking services and environmental impacts would be most closely
related to which level of the facility location hierarchy?




• Question
17


The
weights typically used in the center-of-gravity method are


• Question
18


The
Supply Chain Operations Reference (SCOR) Model function that entails procuring
goods and services to meet planned or actual demand is called ____.



• Question
19


The
Supply Chain Operations Reference (SCOR) Model function that entails all order
management activities from processing customer orders to routing shipments,
managing goods at distribution centers and invoicing the customer is called
____.





• Question
20


Which
of the following is not a basic function of the Supply Chain Operations
Reference (SCOR) model?



• Question
21


The
metric “perfect order fulfillment” is often used to measure ____.


• Question
22


Which
one of the following is not directly related to a supply chain?


• Question
23


A(n)
____ seeks to balance capacity and demand, might use only a few large
distribution centers, and minimize costs of routing products from factories to
retail stores and customers.




• Question
24


A firm
that specializes in certain types of goods-producing activities, such as
customized design, manufacturing, assembly, and packaging, and works for end
users is called a ____.




• Question
25


A
contract manufacturer can offer significant competitive advantages. Which one
of the following is not an advantage of using a contract manufacturer.



• Question
26


A push
system


• Question
27


The
point in the supply chain that separates the push system from the pull system
is called the



• Question
28


The
center-of-gravity method takes all the following into account except


• Question
29


Managing
the flow of goods and materials from the customer backward through the supply
chain is called



• Question
30


____ is
the process of delaying product customization until the product is closer to
the customer at the end of a supply chain.



Answers

Related Questions

Programming : Vulnerabilities and Cybersecurity I...

During this week you are to start working on an individual research paper. This will be approximately 14 pages, single spaced. and at leas...

Business Finance : What is the Societal Marketing...

What is the Societal Marketing concept and how can a small business maximize it to its advantage? Please answer comprehensively in 300...

Mathematics : Need help factoring polynomials...

Please help factor these polynomials. I would also appreciate if you can discuss briefly how you arrived at the answer, and provide tips o...

Business Finance : Draft a Reply to another stude...

Please draft a response to another students discussion Board posting assignment. Here was the question that this student originally was an...

Other : Chapter 3 The Federal Information Securit...

Select one of the regulations discussed in Chapter 3 (FISMA, HIPAA, GLBA, SOX, FERPA, or CIPA) and do some independent research on the reg...

Science : Provide a substantial comment provided...

Please find attached file and provide comment for this subject regarding EBP project....

If you didn't find the right answer

Ask Your Questions, We'll notify you once someone answers it